AquaGard & AquaPruf Accessories

Accessories for: AquaGard 7350 and AquaPruf 7400, 7600, 7600 Ultimate and 7600 Vertical.

Guides

Common Accessory AquaGard AquaPruf Hinged Guide 3 inch

3″ Tall Hinged Guide

  • Stainless Steel Hinged guides can be pivoted back to allow easy access to the belt for cleaning.

 

 

 

 

 

 

 

 


Common Accessory AquaGard AquaPruf Hinged Guide 6 inch

6″ Tall Hinged Guide

  • Stainless Steel Hinged guides can be pivoted back to allow easy access to the belt for cleaning.

 

 

 

 

 

 

 

 


Common Accessory AquaGard AquaPruf Adjustable Hinged Guide

Adjustable Hinged Guide

  • Stainless Steel Rod Guide can be adjusted vertically and horizontally using a wrench. These guides are hinged for easy belt access. NOTE: Guiding is sold for each side of the conveyor separately.

 

 

 

 

 

 


Common Accessory AquaGard AquaPruf Upper Guide with Post

Upper Guide with Vertical Post

  • Used for guiding lids and/or tall parts
  • Round nose UHMW guide with stainless steel backing
  • Equipped with or without tall adjustable height bracket
  • Length: 3’ to 10’ in 1’ increments
    (2) width adjusting options (standard 5” post, 10” post)
  • Brackets provided for every 2’ of length
  • Available in standard adjustable and tool-less adjustable mount styles
  • All brackets and fasteners are stainless steel

 

 


Common Accessory AquaGard AquaPruf OverHead Guide

Overhead Guide

  • For part hold down or cover closing
  • Adjustable height and position across width
  • Round nose UHMW guide with stainless steel backing
  • Lengths: 3’ to 10’ in 1” increments
  • Horizontal Brackets provided for every 2’ of length
  • Available in standard adjustable and tool-less adjustable mount styles
  • All brackets and fasteners are stainless steel

 


Common Accessory Powered Transfer 7350

Transfers

Powered Transfer Specifications

  • FDA approved 1/2” diameter self lubricated nose bar bushings
  • Positive drive FDA approved urethane belting
  • 300 series stainless steel / anodized aluminum construction
  • Plated corrosion resistant bearings
  • Used on infeed and exit tail
  • For infeed tail : Needs conveyor to be ordered with output shaft tail
  • For exit tail : Needs conveyor to be ordered with dual output shaft tail
  • Can be purchased as a conveyor only
  • Does not include mounting brackets or slave drive
  • Includes output shaft only

Conveyor Specifications:

  • Conveyor Width: 4” wide to 36” wide in 2” increments
  • Conveyor Length: Adds less than 8” to conveyor length
  • Conveyor Speed: Up to 175 ft/min

Features & Benefits

  • 1/2” diameter nose rollers for small part transfer
  • Adjustable height and distance to main roller for fine tuning the product transfer
  • High speed positive drive conveyor belts to ensure consistent speed
  • Maintains product speed through transfer for gapping and pacing
  • Located at drive and/or idler end of main conveyor
  • Compatible with both curve and straight conveyors
  • Compatible with all end drive tails and drive mount packages
  • Made of corrosion resistant materials for wipe down or occasional wash down
  • Slave driven from main roller for minimal install requirements

Slave Drive Speed Options:

  • Same Speed
  • Speed Up by 1.6 : 1
  • Speed Down by 1.25 : 1

Common Accessory Powered Transfer Non Dorner

Powered Transfer for Non-Dorner Conveyors

 

 

 

 

 

 

 

 

 

 


 

Roller Transfer

  • 4” wide to 52” wide
  • Includes 0.43” diameter rollers mounted in transfer plate
  • Adjustable mounting to fine tune small parts transfer
  • All brackets and fasteners are stainless steel

 

 

 

 

 


Mounting & Hardware

Accessory Mounting Bars

  • Used for mounting adjustable devices such as photoeyes and sensors
  • Can be mounted directly to frame or in combination with guide brackets
  • 2 Versions:
  • 3’ bar used to mount to 24” hole pattern in frames
  • 1’ L shape used to mount at tail ends
  • Compatible with Value Guide blocks (VG-021-02)
  • All brackets and fasteners are stainless steel

 

 

 

 


Keyslot Bolts

  • Stainless steel mounting hardware
  • M8-1.25 Male mounting stud
  • Used with Dorner key-slot system
  • Eliminates the need to access the inside of the frame
  • Package of 10 pieces

 

 

 

 

 

 


Accessory Mounting Bracket

  • Mount accessory items to the AquaPruf and AquaGard conveyors
  • Mount accessories without frame modifications
  • Clamps ½” diameter shaft for ease of accessory mounting
  • All components are 300 series stainless steel
  • Adjustable along the length of the conveyor
  • All adjustment screws located outside the food zone

Includes

  • All adjustment screws located outside the food zone
  • Clamp ring for ½” shaft with stainless acorn nut (½” shaft not included)

Electrical / Air Mounting Clips

  • Light weight mounting clip for wire clips, conduit clicks, wire tie mounts, etc.
  • Mounts directly to M8 guide bolts and/or lower frame lip
  • May be mounted to inside of frame or outside of frame
  • Offset to clear mounting screws
  • Package of 10 pieces
  • All brackets and fasteners are stainless steel

 

 

 


Photo Eye Kits

Select from a variety of photo eyes and mounting kits.

  • Mount photo eyes to the AquaPruf and AquaGard conveyors
  • Attach bracket or accessories without frame modifications
  • All components are 300 series stainless steel
  • Adjustable along the length of the conveyor
  • All adjustment screws located outside the food zone
  • Fits any 18mm barrel or nose mount photo eye

 

 

 


Drip Pans


Specifications

  • Widths: 6” (152 mm) to 60” (1,524 mm) available in 2” increments
  • Lengths: 24” (610 mm) to 999” (25,375mm) available in 1” increments maximum section lengths of 118” (2,997mm)

Features

  • Catch pans for all AquaPruf and AquaGard Conveyors
  • Tool-less hook design for fast removal and rapid cleaning
  • Provides a 2” window for clean-out access without removal
  • All pans equipped with a 1” containment lip on all sides
  • All components are 300 series stainless steel
  • All adjustment screws located outside the food zone
  • Adjustable along the length of the conveyor
  • Contact factory for additional options


Infeed Chute

Specifications

  • Widths: 6” (152 mm) to 24” (610 mm) available in 2” increments
  • Lengths: 24” (610 mm) to 72” (1,829 mm) available in 1” increments
  • Angles: 5° to 60° in 5° increments

Features

  • Bulk handling options for all AquaPruf and AquaGard conveyors
  • Chute/Hopper mounts to conveyors without any modifications
  • Tool-less hinged design for quick access to the conveyor for rapid cleaning
  • All components are 300 series stainless steel
  • Adjustable along the length of the conveyor
  • All adjustment screws located outside the food zone


Angled Hopper


Features

  • Bulk handling options for all AquaPruf and AquaGard conveyors
  • Chute/Hopper mounts to conveyors without any modifications
  • Tool-less hinged design for quick access to the conveyor for rapid cleaning
  • All components are 300 series stainless steel
  • Adjustable along the length of the conveyor
  • All adjustment screws located outside the food zone

Specifications

  • Widths: 6” (152 mm) to 24” (610 mm) available in 2” increments
  • Lengths: 24” (610 mm) to 72” (1,829 mm) available in 1” increments
  • Angles: 5° to 60° in 5° increments